background image

 
 

 
 

 

IMPORTANT- SAFETY INSTRUCTIONS 

 

WARNING: - To reduce the risk of severe 

injury or death 

 
 

1.

 

READ AND FOLLOW ALL INSTRUCTIONS 

 
 

2.

 

Never let children operate or play with door controls.  Keep the remote 
control (where provided) away from children. 

 
 

3.

 

Personnel should keep away from a door in motion and keep the moving 
door in sight until it is completely closed or opened. NO ONE SHOULD CROSS 
THE PATH OF A MOVING DOOR. 

 
 

4.

 

Test the door’s safety features at least once a month. After adjusting either 
the force or the limit of travel, retest the door operator’s safety features.  
Failure to adjust the operator properly may cause severe injury or death. 

 
 

5.

 

Where possible use the Manual Override Release Lever only when the door is 
closed. Use caution when using this release when the door is open. Weak or 
broken springs may cause the door to fall rapidly, causing severe injury or 
death. 

 
 

6.

 

KEEP DOORS PROPERLY OPERATING AND BALANCED. See Door 
Manufacturer’s Owner’s Manual. An improperly operating or balanced door 
could cause severe injury or death. Have a trained door systems technician 
make repairs to cables, spring assemblies, and other hardware. 

 

 

920.1035.00_USER OPERATING INSTRUCTIONS

Содержание 8800









Отзывы: