There are no user accessible adjustments on the controller other than the following case push button
programming options:
PROGRAMMING USING THE CASE LID BUTTONS
The following functions may be used providing the Control Unit is fitted with an optional Plug-in
Beeper Module.
OPERATIONS COUNTER INTERROGATION
A Door Operations Counter is incorporated. The number of door operations, to the nearest 100
operations, can be checked at any time.
The Door Operations Counter may be checked as follows:
Press and hold the STOP button.
Then press and hold the OPEN button.
Release the buttons after the beep.
The beeper will then indicate the total door operations since the door was installed by sounding long
beeps for 1000's of operations and short beeps for 100's of operations.
For example: Two long beeps and three short beeps indicate that the door has completed 2300
operations. If there is no response after releasing the buttons then the door has completed less than
100 operations.
AUTO-CLOSE - STAY OPEN PROGRAMMING
If the Control Unit has been set to Auto-Close and it is required to disable the Auto-Close function for
example when it is required to hold the door open on a warm summer’s day, then the Auto-Close can
be temporarily disabled by opening the door and waiting for the door to stop in the open position as
follows:
Press and hold the STOP button.
Then press and hold the CLOSE button.
Release the buttons after the beep. (The analogy being -
STOP CLOSING
).
The Auto-Close function will operate normally after the door is next closed using the CLOSE push
button.
920.1035.00_USER OPERATING INSTRUCTIONS
