4
Connecting a device to the RZ5/RZ5D/RZ5P/RZ6 via a fiber optic port.
CAUTION!
When correctly connected to the RZ5/RZ5D/RZ5P/RZ6, the fiber optic
cables emit a bright red light. Avoid unnecessary eye contact.
The RZ5, RZ5D, RZ5P, and RZ6 may include a variety of fiber optic input/output ports.
Refer to
the operating instructions for the specific device in the System 3 Manual for information on
making connection correctly.
Monitor Speaker
CAUTION!
Ensure that the volume is at the minimum setting and adjust it until the
proper volume is reached.
The RZ5/RZ5D/RZ5P/RZ6 is equipped with an integrated monitor speaker. The speaker is
provided primarily for audio monitoring. A knob located on the front plate is used to adjust the
volume of the output. The knob is labeled for MIN and MAX volume settings.
Refer to the RZ5,
RZ5D, RZ5P, or RZ6 Processor sections in the System 3 Manual for more information.
Maintaining the RZ5/RZ5D/RZ5P/RZ6
Safety Notices
Before applying power to the RZ5/RZ5D/RZ5P/RZ6 chassis, verify that the correct safety
precautions are taken.
WARNINGS!
Read the following warnings prior to operation.
➢
If the device is damaged, or fails to operate as expected, disconnect the power cord and
contact TDT support immediately.
➢
The mains disconnect for the device is the power cord. To completely disconnect power
to the device, the power cord must be disconnected.
➢
Position the device to ensure the power cord is readily accessible after installation and
during operation.
➢
Before applying power to the device, you must correctly connect the power cord to a
properly rated standard socket outlet provided with a protective earth contact.
➢
In the event of impaired ground protection, avoid using the device to prevent possible
damage.
➢
When removing the power cord from either the power supply or socket outlet, grasp the
plug, not the cord, in order to avoid damaging the cable.
➢
Do not attempt to disassemble the power supply or chassis by removing any of the
exterior housing of the RZ5/RZ5D/RZ5P/RZ6. If you experience any issues, contact TDT
support immediately.
➢
Do not attempt to alter this device in any way that deviates from its intended operation as
described in this operator’s manual.
➢
Capacitors contained inside the device may retain their charge even after power has been
disconnected from its supply source.
