RZ5/RZ5D/RZ5P/RZ6
Processor Operator’s Manual
3
Optional UDP Interface
The RZ UDP Ethernet interface is designed to transfer data to or from a PC. The RZ UDP
interface (if available) is located on the back panel of the RZ processor and accepts a standard
Ethernet cable.
Refer to the UDP User Guide for more information.
The Indicator Light
A front panel switch turns on the power supply and includes an indicator light. The power switch's
blue LED will illuminate when the chassis is switched on.
VFD Display
CAUTION!
To avoid potential damage, do not place any sharp objects near the VFD
Display.
The Vacuum Fluorescent Display (VFD) front panel display shows information about each DSP,
the optical PC interface, the preamplifier ports, and system I/O. The Mode button allows the user
to cycle between information. Press and hold the mode button to automatically cycle through each
display.
Refer to the RZ5, RZ5D, RZ5P, or RZ6 section of the System 3 Manual for more
information.
Input and Output Ports
CAUTION!
The input and output ports located on the front and back panels of the
RZ5/RZ5D/RZ5P/RZ6 chassis contain sensitive electronics.
Refer to the
RZ5, RZ5D, RZ5P, or RZ6 Technical Specifications in the System 3 Manual
before making any connections.
The RZ5, RZ5D, RZ5P, and RZ6 are equipped with several different analog and digital I/O
capabilities. They include onboard D/A and A/D conversion for stimulus generation, experiment
control, and input/output of signals to/from a variety of other sources.
Refer to the RZ5, RZ5D,
RZ5P, or RZ6 section of the System 3 Manual for more information.
