Gigant sweeping machine
28
3.4.8 Readjustment of the sweeping proile
The safety instructions from Chapter 3.3 apply.
When operating the Gigant sweeping
machine, there should be a sweeping proile
of a = 6 - 10 cm width (upon raising the
sweeping machine, the width of the cleaned
surface should be 6 - 10 cm).
Check the sweeping proile on even ground!
If the width is not suficient, or the ground contact pressure
is too low, the suspension of the sweeping drum must
be readjusted evenly on both sides via the raster lever
system.
Take the sweeping drum's net weight into
account!
Ensure that the routing of the hydraulic lines
is free of twisting and kinks.
• Lift the sweeping machine and keep it close to the
ground.
• Pull the raster lever (1) of the raster setting backwards
• Latch the raster level into the desired position on the
adjustment raster (2).
• Carry out the raster setting of the sweeping drum evenly
on both sides.
• Check that the width of the sweeping proile is
a
= 6 - 10 cm.
ATTENTION
ATTENTION
N O T E
N O T E
1
2
Содержание Profi Gigant
Страница 1: ...Profi Gigant Sweeping Machine Operating Manual ...
Страница 2: ......
Страница 4: ...Preface 4 ...
Страница 6: ...Table of contents 6 ...