26
3T
SPEEDY is moved with two people: the mobile access and working tower is “PUSHED” at a maximum height as specified
by the manufacturer; it is not “PULLED”.
When the mobile access and working tower is left unattended, ensure that the stabilizers are working correctly (see
section § 2-1-6), prevent all unauthorised access, and protect it from harsh weather conditions.
Mobile towers are not designed to be covered in sheeting.
Mobile towers complying with EN 1004-1 are not designed to be used as a means of peripheral protection.
Mobile towers complying with EN 1004-1 are not designed to be used as a means of entering or exiting other
structures, such as a staircase, for example.
It is forbidden to:
o
Use a lifting beam, even a manual one, on the outside of the mobile tower.
o
Cover the mobile access and working tower in sheeting, even partially.
o
Increase the height of the tower above the authorised height.
o
Use components other than the ones that have been supplied and described in the parts list.
o
Use damaged parts.
o
Use a mobile access and working tower which has not been assembled vertically (tolerance: 1%).
o
Use a mobile access and working tower which has not been assembled according to the instructions in this
manual.
o
Create a bridge between a mobile access and working tower and a building, or between two mobile towers.
o
Lean an access ladder against the mobile tower.
o
Jump on the platforms.
o
Use boards as a platform.
o
Access to the working platform from the outside.
o
Move the mobile access and working tower on ground which is sloped more than 3%.
o
Move the mobile access and working tower with a motor vehicle.
o
Move the mobile access and working tower in wind speeds above 35 km/h.
o
Move the mobile access and working tower when personnel or equipment are on it.
o
Lift the mobile access and working tower with a crane or bridge crane.
Keep the trap door blocked open.
Chapitre 5 : Passage de porte de la base / Passing the base through a door
885 mm HT
1750 mm HT
