Installation 3 - 1
Installation
This chapter contains information on;
Installing and Ventilation of your Preamplifier
Installing &
Ventilation
Ensure that the amplifier is placed in a stable location that is able to accept its weight the Seer
weighs approx. 6 kilograms.
It is not recommended that preamplifier is installed in a cupboard or in any enclosed area if
there is not sufficient air space and ventilation to keep it cool. A minimum distance of four
inches above the preamplifier should be allowed as this is where most of the heat is generated.
Dedicated racks are available for housing your tube equipment, contact your dealer or Tube
Technology. Do not locate the preamplifier close to radiators or any other heat source, this
could increase the operating temperature. Do not directly block the ventillation grilles on the
top cover of the preamplifier.
Do not locate the preamplifier too close to a turntable, as the cartridge could pick up hum from
the power transformer.
DO NOT SIGHT THE PREAMPLIFIER OR POWER SUPPLY NEAR WATER OR HEAVY
MOISTURE, THE VENTILATION GRILLES ON THE TOP OF THE UNIT ARE AN EASY
ACCESS POINT FOR MOISTURE TO ENTER.
