Getting Started 1-1
Getting
Started
This chapter contains information on;
Unpacking your Seer Preamplifier
Your preamplifier is packed in "jiffy-cell" support foam. Grip the top of this foam and simply pull it
out of the box. The Seer is then left sitting on its middle support and can be lifted out.,
The following items are included in the packaging of the Seer;
1 x Seer Preamplifier
1 x Reference Manual & Registration Card
1 x IEC Mains Leads
(only on serial nos. 6022 and up)
1 x Allen Key
Your pre-amplifier is supplied with the tubes already in place. Check through the mesh windows on
the top lid making sure that the (2 x LINE) (4 x PHONO) tubes have not worked free in transit.
Unpacking
All packing should be retained. Amplifiers returned under guarantee are only accepted in their
original packaging.
