Tube-Line Nitro 450, Руководство оператора

Страница: 9 / 58

9
Safety Signs
1. Keep safety signs clean and legible at all
times.
2. Replace safety signs that are missing or
have become illegible.
3. Replaced parts that displayed a safety
sign should also display the current sign.
4. Safety signs displayed in Safety Sign
Locations each have a significant purpose
and need to be cleaned or replaced when
necessary.
5. Safety signs are available from your
authorized distributor or dealer parts
department or from the manufacturer.
How to Install Safety Signs
1. Be sure that the installation area is clean
and dry
2. Be sure the temperature is above 10 C
(50 F)
3. Determine the exact position of the
new safety sign before removing the paper
backing.
4. Align the sign over the specific area,
carefully press the sign on, slowly peeling
away the backing paper while smoothing the
sign in place.
5. Small air pockets can be pierced with a pin
and smoothed out using a piece of sign
backing paper.
Safety Training
1. Safety is the primary concern in the design
and manufacture of our products.
Unfortunately, our efforts to provide safe
equipment can be wiped out by a single
careless act of an operator or bystander.
2. In addition to the design and configuration of
equipment, hazard control and accident
prevention are dependent upon the
awareness, concern, prudence and proper
training of personnel involved in the operation,
transportation, maintenance
and storage of this equipment.
3. It has been said, “The best safety feature is
an informed, careful operator.” We ask that
you to be that kind of operator. It is the
operator’s responsibility to read and
understand ALL safety instructions in the
manual and follow them. Accidents can be
avoided.
4. Working with unfamiliar equipment can
lead to careless injuries. Read this manual
before assembly or use, to acquaint yourself
with the machine. If this machine is used
by any person other than yourself, or is
loaned or rented, it is the machine owner’s
responsibility to make certain that the
operator, prior to using:
• Reads and understands the operator’s
manual
• Is instructed in safe and proper use.
5. Know your controls and how to stop the
engine and machine quickly in an emergency.
6. Train all new personnel and review
instructions frequently with existing workers.
Be certain only a properly trained and
physically able person will use the machinery.
A person who has not read and understood all
the safety instructions is not qualified to use
the machine. An untrained operator exposes
himself and bystanders to possible serious
injury or death. If the elderly are assisting with
the work, their physical limitations need to be
recognized and accommodated.
THINK SAFETY! WORK SAFELY!