Easi-Pulse
TM
F. Power off
The device will power off automatically when it gets no signal for 5 seconds.
The device cannot power off when it is storing data.
6.2 Attention for operation
A. Please check the device before use.
B. The finger should be in a proper position (see the attached illustration
of Figure 4 for reference), or else it may result in an inaccurate
measurement.
C. The SpO2 sensor should not be used at a location or with a limb with
an arterial canal or blood pressure cuff or whilst receiving intravenous
injection.
D. Do not fix the SpO2 sensor with adhesive.
E. Excessive ambient light may affect the measuring result.
F. Strenuous action of the subject or extreme electrosurgical interference
may also affect the accuracy.
G. Please clean and disinfect the device after operating according to the
User Manual(7.1).
6.3 Clinical restrictions
A. Some medical conditions will affect the SpO2 reading by this monitor and
may be inaccurate.
7 Maintenance, transportation and storage
7.1 Cleaning and Disinfecting
Use medical alcohol to disinfect the device, nature dry or clean it with clean
soft cloth.
7.2 Maintenance
A. Please clean and disinfect the device before using according to the User
Manual(7.1).
B. Please change the battery when the screen shows.
C. Remove the battery from the device for long periods of storage.
15
