TTL Luftschleieranlagen - Controller UBT2-E
8
7. Operating modes
7.1 Manual - Operating mode - manual operation
If the step option is displayed in the bottom line, you can set different fan settings
by turning the multifunctional rotary knob. If you press the multifunctional rotary
knob, the heating option will be displayed. A heating setting from 1 – 3 can be tur-
ned on by using the multifunctional rotary knob depending on the set fan setting.
Fan step 1 - 2
- heating step 0 -1
Fan step 3
- heating step 0 - 2
Fan step 4 - 5
- heating step 0 - 3
Set the
Manual operation (if required). Press the Mode key (PGM Mode dis-
playd). Select manual by using the multifunctional rotary knob (the text colour will
FKDQJHIURPRUDQJHWREODFN3UHVVWKHNQREWRFRQÀUPWKHVHOHFWLRQ7KHPDQXDO
option is displayed on the top line of the display in addition to the actual tempera-
ture. Press the multifunctional rotary knob to activate manual operation.
(Only for operation with a timer)
Turn the multifunctional rotary knob to set the setting in the bottom pre-selection line. Press the multifunc-
WLRQDOURWDU\NQREWRFRQÀUP1H[WWXUQWKHNQREWRVHOHFWDIDQVHWWLQJDQGSUHVVWKHNQREWRFRQÀUPWKH
selection. Set heating settings 1 - 3 using the same method (depending on the set fan settings, see above).
Select the timer using the multifunctional rotary knob and set the related clock symbol.
Clock symbol
= timer OFF
Clock symbol orange = timer set in advance
Press the
MODE key again to activate the selected operational mode (also see point 8).
(Default setting: fan step = 0, heating step = 0 -symbol color blue).
7.2 AutoTK - Operating mode - automatic mode with door contact control
Press the
Mode key (PGM Mode display). Select AutoTK using the multifunc-
tional rotary knob (the text colour will change from orange to black). Press the
NQREWRFRQÀUPWKHVHOHFWLRQ7KH
AutoTK option is displayed on the top line of
the display next to the actual temperature.
Next, you can set a fan setting, heating (depending on the selected fan setting, also
see point 1) and/or the timer using the multifunctional rotary knob. Turn the knob
WRWKHOHIWRUULJKWWRGRWKLVDQGSUHVVWKHNQREWRFRQÀUPWKHVHOHFWLRQ'HIDXOW
setting: fan step 0 and heating step 0).
The integrated timer can be set in advance (also see point 8).
Clock symbol
= timer OFF
Clock symbol orange
= timer set in advance
Press the
MODE key again to activate the selected operational mode.
The switch-off of air curtain device(s) by OFF key (0) at the UBT-E control panel doesn`t
disconnect automatically the power connection to the electricity grid. Electrical systems
inside the air curtain unit as well as in the control panel and also the power cable and the
data lines may still be energized. The complete electrical disconnection of the air curtain
device from the mains will be effect exclusively by a repair switch provided by customer!
20°C
So 01.01.12 - 11.55
AutoTK
Stufe
20°C
So 01.01.12 - 11.55
Hand