TTF Limo-GT, Инструкции по обслуживанию, Страница: 8 / 35

Differential removal and installation part 2
3. Remove the draining plug (underside differential bell housing)
and drain all differential oil, check the inside of the plug for
metal debris (there is a magnet here). Lots of debris indicates
excessive gear wear.
4. Unbolt all differential bolts and remove the differential. (Pre
2017 vehicles have axle structure that needs to be removed as
well. If this structure is welded in place it needs to be cut away
and reinstalled using a retrofit flange kit)
Installation:
1. Thoroughly clean the inside of the axle and all parts to remove
all debris and dirt.
2. Clean the contact surface of differential and axle and put
silicone gasket sealer paste on the flange and install the green
gasket.
3. Fit new differential, use lock bonding material on the bolts and
tighten the bolts with 14Nm. (TTF recommends to install new
drive shafts whenever installing a new differential)
4. Fill the differential with 80ml Tranself B 80W90.
5. Reassemble all other parts.
Rear axle and differential maintenance
8