17
E. Auto Channle Scan
1. The
Tuner
screen will be displayed; default choice is
Antenna
. If you are using Cable (No Box) Service,
press
to highlight
Cable
.
press
OK
or
to go to the next screen.
2. The
Channel Scan
screen will be displayed; default
choice is
Scan
. Press to commence the search for
available channels to be stored into memory.
Note:
If you do not want to scan for channels at
this time, press
CLEAR
to stop scanning.
3. The screen will be change to show the progress if
the search for Analog (NTSC) and Digital (ATSC)
channels.
4. When finished, the Complete screen will be
displayed to inform you that the unit has completed
the Initial Setup.
Press
CLEAR
to exit and begin watching TV.
Note:
• If you select to skip this step by chosing
Skip Scan,
or by
pressing
CLEAR
to stop scanning during Auto Scanning,
next time that you decied to complete this procedure,
you’ll need to select the TV as input (through
INPUT
key)
and then go through the Menu option to select the Signal
Type to get the option of scanning the channels again.
• If you are using a satellite or cable set-top box, you do not
need to complete Channel Search.
After an intial setup is completed:
• You want to scan the channels automatically again, refer
to page 23;
• You can add the desired channels unmemorized by
Channel Skip (P23);
• If you wang to change to another language, refer to page
29;
• If you want to set the time zone, refer to page 25.
Initial Setup
Tuner
Please select your tuner mode:
Cable
Antenna
Back
OK
Next
Select
Exit
CLEAR
Initial Setup
Channel Scan
First, please connect
cable.
antenna or
Start channel scan now?
If you skip this step, the channel
scan could be performed by going to
the Setup menu later.
Skipscan
Scan
Back
OK
Next
Select
Exit
CLEAR
Initial Setup
Complete
Back
Exit
CLEAR
Congratulations!
Completed Initial Setup.
Please press [OK] to exit the Initial
Setup Menu.
