Copyright © 2017 TTA All Rights Reserved.
M8A pro Use Introduction
38
7.2 AB Mode
AB mode is a more simple efficient mode with fault tolerance to operate.The working
theory is above in the picture.Record the point A and B,the UAV will plan the flight line like
this.
1. Operate Steps:
1) Record the point A,switch the mode to GPS mode.Until the drone self-hovering
steadily,switch F to ”Point A memorized”.After that,the LED flash yellow for 2
seconds.The controller have voice prompt.
2) Record the point B,drive the drone to the position you want,
be sure it is at least 10
meters away from point A
.Until the drone self-hovering steadily,witch F to ”Point B
memorized”.After that,the LED flash yellow for 2 seconds.The controller have voice
prompt.
3) Select the direction,switch E (Flight mode) to AB mode, move the roll joystick to
select the roll direction.Move the joystick to the left limitation,the drone rolls to the left
side,move the joystick to the right limitation,the drone rolls to the right side.While the
drone doing AB point flight mode,the user can stop controlling the joystick.
Make sure
