Copyright © 2017 TTA All Rights Reserved.
M8A pro Use Introduction
39
the water is enough,the pump is under auto-controlled or manual-controlled.
4) AB Mode Correction
①
Altitude correction:Control the flight altitude by the throttle joystick, “up” for the
drone to rise, the “down” for the drone to set ;
②
Correct the the rudder to control the direction;
③
Adjust point A:while the drone moving from point B to Point A,push up the pitch
stick to make point A 1m closer to point B,push down the pitch stick to make point A
1m away from point B.
④
Adjust point B:while the drone moving from point A to Point B,push down the pitch
stick to make the point B away from point A,push down the pitch stick to make point
B 1m closer to point A.
5) Shut Down and Quit
①
When set the “no pesticide” action to self-hovering or return,in AB mode this
function still works.
②
When set the “low battery” action to return,in AB mode the this function still works.
③
After the spraying work is done,AB mode can be shut down by switching into
altitude mode.
6) To return to the breakpoint, after broke the AB mode route automatically or manually.
Filling the pesticide in the tank and taking off, then switch E (flight mode)to AB mode
directly ,the drone would return right to the breakpoint.
2. Delete dates of Point A and B
Move stick F (AB recording) for 4-5 times rapidly,LED alternately flash red green and
yellow,AB mode dates deleted.
Without deleting dates of last AB point,can not set new
AB point.
