Tsurumi Pump LH Series Скачать руководство пользователя страница 1

Страница: 1 / 22

17200470/B-10224-1

INTRODUCTION

Thank you for selecting the Tsurumi LH/LH-W Series submersible high-head/extra high-head dewatering

pumps.

This operation manual explains the product operations and gives important precautions regarding its safe

use. In order to use the product to maximum benefit, be sure to read the instructions thoroughly and follow

them carefully.

To avoid accident, do not use the pump in any way other than as described in this operation manual. Note

that the manufacturer cannot be responsible for accidents arising because the product was not used as

prescribed. After reading this operation manual, keep it nearby as a reference in case questions arise during

use.

When lending this product to another party, always be sure to include this operation manual as well.

If this operation manual should become lost or damaged, ask your nearest dealer or Tsurumi representative

for another copy.

Every effort has been made to ensure the completeness and accuracy of this document. Please contact your

nearest dealer or Tsurumi representative if you notice any possible error or omission.

The contents of this document may not be copied in whole or in part without the express permission of

Tsurumi Manufacturing Co., Ltd.

OPERATION MANUAL

CONTENTS

1. BE SURE TO READ FOR YOUR SAFETY .....................1

2. NAME OF PARTS

..........................................................4

3. PRIOR TO OPERATION

...............................................5

4. INSTALLATION

.............................................................6

5. ELECTRICAL WIRING

....................................................7

6. OPERATION

....................................................................9

7. MAINTENANCE AND INSPECTION

...............................11

8. DISASSEMBLY AND REASSEMBLY

.............................13

9. TROUBLESHOOTING

..................................................18

TSURUMI MANUFACTURING CO., LTD.

LH/LH-W Series

Submersible High-Head/Extra High-Head Dewatering Pumps

(LH6110 -51/61, LH8110 -51/61, LH4110W -51/61)

Содержание LH Series























Результаты поиска

Содержание LH Series

Отзывы:

Похожие инструкции для LH Series

Бренды по названию

Популярные бренды

Tsurumi Pump LH Series, Руководство по эксплуатации

Результаты поиска

Содержание LH Series

Отзывы:

Похожие инструкции для LH Series

Бренды по названию

Популярные бренды