TSS TREADREADER, Руководство по эксплуатации продукта, Страница: 35 / 38

35
1
2
3
4
5
6
7
1
2
3
4
5
6
7
7.3.2 LED 3: Blink count = 10 - Voltage limit exceeded
7.3.3 LED 1,2,3,5,7: Blink count = 7 - Error undetermined
Solution:
1. Clear the error by pressing all three buttons at the same time.
2. Wait for 10 seconds after clearing the error, before turning the scanner
on again.
3. If the error persists, please contact your local distributor.
Solution:
1. Clear the error by pressing all three buttons at the same time.
2. Wait for 10 seconds after clearing the error, before turning the scanner
on.
3. If the error persists, please contact your local distributor.