TSS TREADREADER, Руководство по эксплуатации продукта, Страница: 10 / 38

10
TREADREADER
TM
HANDHELD • PRODUCT MANUAL
03 •
Buttons and LED’s on the handheld scanner
3.1 Buttons
3.1.1 Power button
3.1.2 Battery button
There are three buttons on the HandHeld scanner. The LED’s indicate power
(on/off), Wi-Fi connectivity, battery level and scanner status.
Battery level/
scanner status
Network mode/
transmitiing data
67 - 100%
Ready to scan
Device connected
to the application
34 - 66%
Processing data
Wi-Fi enable and
ready for connection
0 - 33%
Fault
Power
(On/Off)
Below is the general description of the use and interaction of the buttons on
the HandHeld scanner. Throughout the manual there are other uses for the
buttons and combinations of button presses. For more detailed information,
please see chapter 6.
Holding down the power button for 2 seconds will turn the scanner on/off.
The top LED will be lit when the HandHeld scanner is on, and a vibration will
indicate the on/off event.
Holding down the battery button for 1 second will indicate the battery level of
the HandHeld scanner, as shown by the LED’s in Fig. 2.