background image

Warranty

     

This product is warranted for 3 years, starting from the date of the products purchase. During 

the warranty period, the manufacturer is obliged to repair, or replace the whole product or its parts 

if appear any defects caused by poor quality of materials or assembly. This warranty is recognized 

only  if the product was used in accordance with the operating instructions, it was not repaired or 

disassembled by unauthorized experts, and has not been damaged due to improper handling, and 

also the complete set of products retained. This warranty does not cover normal wear and tear 

of the product. The warranty does not apply to defects resulting from (After the goods have been 

delivered to the consumer):

• 

Non-compliance with the rules of operation, use of the product for the purposes for which it

• 

is not intended;

• 

Unskilled installation that resulted failure of the elements of the product, or led to the poor 

performance of the product;

• 

Mechanical damage, traces of chemical effects appeared after the transfer to a consumer; 

• 

Damaging or product malfunction caused by pets, domestic insects and pests, other people.

• 

Locking of the movable elements resulted by the extrinsic objects getting inside.

• 

Non-compliance with the manufacturer storage and transportation rules;

• 

Unauthorized changes in product design or the installation of parts which are not provided by 

a technical documentation and operating instructions;

• 

Increased wear of the products as a result of product use in production purposes, as well as 

improper maintenance or improper care; 

• 

Changing the appearance of the product which does not affect the performance of equipment, 

due to normal wear and tear.

21

Содержание K01RP

























Отзывы: