TSPROF K01RP, Инструкция по эксплуатации

Страница: 19 / 24

19
(1)
(2)
2. With a 2mm hex wrench (14A) from the spare parts package, using screws 3 and 4,
adjust the steady force of the preload of the thumbscrew of the Rack and Pinion lift.
(3)
(4)
Adjustment of the Rack and Pinion lift movement
1. With the 2 mm hex wrench (14A) from the spare parts package, adjust the pinch screws
1 and 2, as it shown in the picture below, to avoid the up and down free movement of the
rack and pinion lift. Changing of an angle with a turn of the tnumbscrew should have a
slight resist.