TSL TOUCHMIX (AVM-T-MIX), Руководство по эксплуатации

Страница: 39 / 49

P a g e | 39
AVM-T-MIX User Handbook Version Three
In order to commence the upload sequence, simply press the UPDATE button and the FP4, FPGA,
and PIC code will be loaded in order. Progress in indicated via the 0-100% scale.
Once complete, AVM-T-MIX will display a message confirming that the process has been
successfully concluded prompting the user to perform a factory reset. To perform a factory reset it
is necessary to remove power from the unit and then re-apply power whilst pressing the
Home
button until a message appears to confirm that Factory Default has been reloaded. Press Home
once more and you will be able to operate AVM-T-MIX with the new firmware active.
The action of restoring Factory Default status will remove any stored memories from the
AVM-T-MIX. Please backup and restore memories from an external device if required.
Please note that the UPGRADE sequence may take several minutes and may appear to
‘stall’ – it is important not to interrupt the process or to remove power from the device
during a software upload as this may render the AMU unusable.