TSL TOUCHMIX (AVM-T-MIX), Руководство по эксплуатации

Страница: 23 / 49

P a g e | 23
AVM-T-MIX User Handbook Version Three
2.9 X-Y Routing

The XY router gives the user complete control over source to destination configuration.
Any physical input or buss (mixer, monitor) can be assigned to any AES or analogue
output connector

The XY router allows the user to create different configurations for each User Preset
enabling them to tailor connectivity to suit different project workflows and recall them when
needed.

The XY router can split the left and right components of any external audio source and
route them independently to the chosen destinations.

Any routing created within the XY router can be copied as a ‘default’ from the Overview
page to the all user presets. For example; the user may be setting up a room with 5.1
speakers wired to analog outputs 1 to 6. After creating this route within the XY system, the
user can then enter the Overview page, select Analog Pair 1,2,3 outputs and press ‘Set as
Default’. When selected, the default condition will be written automatically to all 18 User
Presets.

Unlike previous versions of T-MIX, the user is now able to select which of the SDI BNC
connecters (SDI 1A or SDI 1B) is routed to the single de-embedder and made available to
the mixer and router. This initial releases of T-MIX code XY
identifies the BNC’s labelled
on the rear panels as SDI 1 and SDI 2 and refers to them in the menu as SDI 1A and SDI
1B respectively. This is to avoid confusion with the options AVM-T-MIX 2SD model which
features a second de-embedder card and an additional BNC connection.
2.9.1 XY Routing Setup
The XY router is found via the setup menu by pressing Setup>Output.
The router is divided into two parts, Source and Output and can be used to assign any physical
input (SDI, AES and analogue) and internal source (Mixer 1, Mixer 2 and Monitor) to any of the
physical output ports.