TSI Instruments PORTACOUNT 8020, Дополнение, Страница: 19 / 28

P
ORTA
C
OUNT
®
Plus Model 8020 Technical Addendum revised 7-27-2001
TSI Incorporated, St. Paul, Minnesota, USA 19
Copyright © 2001 all rights reserved
COMMAND DESCRIPTION
Dxxxxxx.xx<cr>
Display Concentration on PORTACOUNT Plus
This command clears the entire Display and then displays a concentration value.
The PARTICLE/cm3 message is turned ON.
xxxxxx.xx
is the concentration
to display and can be any number from
000000.00
to
999999.99
. The
concentration value must be 9 characters long including the decimal point so add
zeros as needed on the left. Characters to the right of the decimal point are not
displayed if the value to the left of the decimal point is above 100, however, they
must be included in this command even if they are both zeros.
For example, to display a concentration of 5375 send the command:
D005375.00<cr>
The PORTACOUNT Plus responds by echoing:
D005375.00<cr><lf>
Lxxxxxx<cr>
Display Fit Factor Pass Level on PORTACOUNT Plus
This command clears the Display and then displays a fit factor pass level. The
FIT FACTOR PASS LEVEL message is turned ON.
xxxxxx
is the fit factor
pass level to display and can be in the range from
000000
to
999999
. The
value to display must have 6 characters so add zeros on the left as needed.
For example, to display a fit factor pass level of 1000, send the command:
L001000<cr>
The PORTACOUNT Plus responds by echoing:
L001000<cr><lf>
Fxxxxxx.x<cr>
Display Fit Factor on PORTACOUNT Plus
This command clears the entire Display and then displays a fit factor value. The
FIT FACTOR message is turned ON.
xxxxxx.x
is the fit factor to display and
can be any number from
000000.0
to
999999.9
. The fit factor value must
be 8 characters long including the decimal point so add zeros as needed on the
left. The character to the right of the decimal point is not displayed if the value
to the left of the decimal point is above 10, however, it must be included in this
command even if it is zero.
For example, to display a fit factor of 6240 send the command:
F006240.0<cr>
The PORTACOUNT Plus responds by echoing:
F006240.0<cr><lf>