–7–
3. Insert RH/Temp Sensor through gland and tighten
gland nut
. Extend probe ~2.75” (7 cm) beyond nut.
4. Attach the sun shield to the top of the RH/Temp
Sensor as shown. Sun Shield should not touch
sintered cap of RH/Temp Probe.
5. Attach RH/Temp Sensor cable to heated inlet
control module (J3).
6. Attach the two larger (gray) connectors to side of
the photometer.
7. Attach the two smaller (white) connectors to the
Power/Communication inputs (J1 and J2) of the
heated inlet control module (
RH/Temp Sensor
Cable J3 is not shown for clarity
).
