buyTSI.com - 800.223.4540
ASSEMBLY - DISCHARGE SYSTEM
Locate discharge
barrel and the
adjustable discharge
barrel. Position the
barrels about 3½ to 4
feet apart so that all
four angled rim rests
point inward.
Connect the facing
barrels using two
adjusting rods by
inserting each into
the square sleeves
located at the end of
both the barrels.
Locate the 2”(6ft)
and two hose
clamps. Place a
clamp on each end
of the hose and
secure one end of
the hose to the open
end of the adjustable
discharge barrel.
Secure the opposite
end to the manifold
opening on the
discharge barrel
tighten the clamps
to FULLY SECURE
the 2" hose (6ft)
NOTE
: Allow the distance between the barrels
to be slightly greater than the diameter of your
wheel. This ensures easier adjusting once the
mounting process has begun.
Turn the locking
T-handle to securely
tighten the two
adjusting rods
into place on the
discharge barrel
side. The opposite
side will remain
adjustable for later
use.
When completed
the assembly should
resemble Fig 1.6
