Operation
19
When measuring
Flow
as the
Primary
measurement, the parameters
can be quickly changed by pressing the
or
key while on the
main measurement screen:
Make adjustments with the
or
arrow keys and press
to
accept, or enter the
Select Duct
or
Select
Kfactor
menu to choose a
different pre-programmed flow value or dimension.
The
Horn
numbers are the models of the horns. For example, 100
refers to a horn model number AM 100. Only horns with Model
numbers as follows can be used with this function: AM 100, AM 300,
AM 600 and AM 1200. If a horn model number is chosen, the
instrument will return to measuring mode and use a preprogrammed
curve to calculate flow rate from velocity when using a
thermoanemometer probe.
The
Air cone
selection applies to the Model 995 Rotating Vane
Anemometer and the Air Cone kit p/n 801749 which are used to take
flow measurements on small outlets.
VOC SETUP
This menu item applies to TSI probes that measure Volatile Organic
Compounds (VOC). Refer to the manual included with VOC probe
Models 984, 985, 986, and 987 for information on usage and setup.
www.
.com
1.800.561.8187
