background image

 

Specifications

 

45 

Power Requirements:  

Four AA-size batteries (included) or  

AC Adapter p/n 801761

 

Input:  90 to 240 VAC, 50 to 60 Hz 

Output: 9 VDC, 2A 

 

 

1

  Temperature compensated over an air temperature range of 40 to 150°F (5 to 

65°C). 

2

  The accuracy statement of ±3.0% of reading or ±3 ft/min (±0.015 m/s), whichever is 

greater, begins at 30 ft/min through 9999 ft/min (0.15 m/s through 50 m/s). 

3

  Pressure velocity measurements are not recommended below 1000 ft/min (5 m/s) 

and are best suited to velocities over 2000 ft/min (10.00 m/s). Range can vary 

depending on barometric pressure. 

4

  Accuracy is a function of converting pressure to velocity. Conversion accuracy 

improves when actual pressure values increase. 

5

  Accuracy with instrument case at 77°F (25°C), add uncertainty of 0.05°F/°F 

(0.03°C/°C) for change in instrument temperature. 

6

  Accuracy with probe at 77°F (25°C). Add uncertainty of 0.1% RH/°F (0.2% RH/°C) 

for change in probe temperature. Includes 1% hysteresis. 

7

  Overpressure range = 190 in. H

2

O (7 psi, 360 mmHg, 48 kPa). 

 

 

 

www.

.com

[email protected]

1.800.561.8187

Содержание 9565 Series
















































Отзывы: