TSI Instruments 8145-CEOD, Руководство по эксплуатации и обслуживанию

Страница: 17 / 28

Setting Up 7
4. Press the 💡 button on the solar controller to turn on the power to
the BlueSky
™ monitor and cellular modem (if equipped). See
Chapter 5 for troubleshooting power issues.
Figure 7 : Solar power controller
5. Make sure the lid gasket is clean and free from any debris. Then
carefully close the cover, making sure that wires are clear of the
seam and hinge area. The cover snaps into place. There is one
center security bolt that can be used to secure the cover. The
included padlock can also be used to lock the enclosure.
6. Connect the USB cable that is connected to the solar power
controller to the micro USB port on the bottom of the
BlueSky
™ monitor.
Figure 8: Micro USB port