TSI Instruments 8145-CEOD, Руководство по эксплуатации и обслуживанию, Страница: 18 / 28

8 Chapter 2
Cellular Modem Setup (if equipped)
Figure 9 : Solar controller and cellular modem
Installing the SIM Card
1. Remove the cellular modem from the solar power enclosure by
grasping the modem and pulling it straight off. The cellular
modem is secured with hook-and-loop (Velcro
®
) strips.
2. Detach the power cable from the cellular modem by depressing
the tab on the power cable connector.
3. Access the SIM card tray by using the SIM needle tool
provided with the system. Push the needle tool into the access
hole next to the SIM card port and push until SIM card tray comes
out
.
4. Place the SIM card in the SIM card tray with an included
adapter if needed and insert the tray into the cellular modem .
Note the orientation and the angled corner of the SIM card in the
SIM card tray.
®
Velcro is a registered trademark of Velcro IP Holdings.