TSI Incorporated 8372, Руководство по эксплуатации и обслуживанию

Страница: 15 / 55

Set Up 5
8
“STD”
or
“ACTUAL”
will be displayed at all times.
“STD”
refers to
readings that are based on standard conditions of 29.92 in. Hg (760
mm Hg) and 70
°
F (21.1
°
C).
“ACTUAL”
refers to readings that are
converted to local conditions based on temperature and barometric
pressure.
9
“K
f
”
: K factor symbol to indicate that the readings have an adjustment
factored in.
10
“TOTAL”, “MIN”, “MAX”, “AVG”, “COUNT”
will be displayed when viewing
STATISTICS
.
11
“TEST ID”, “BRANCH”, “TERMINAL”
will be displayed when viewing data
for a
SAMPLE
or when reviewing data.
Display Units
The A
CCU
B
ALANCE
Plus is shipped with cubic feet per minute (CFM) as the
default flow unit,
°
F for temperature, and in. Hg (inches of mercury) for
barometric pressure (unless the metric version was ordered). If you wish to
change the units to l/s (liters per second), m
3
/hr (cubic meters per hour),
m
3
/min (cubic meters per minute),
°
C for temperature, and mm Hg
(millimeters of mercury) for barometric pressure, see Changing DIP Switch
Settings in Chapter 2. Please note that no units will be shown on the display
for barometric pressure.
Keypad
Below is a drawing of the key pads, Figure 4, for the Model 8372, Figure 5,
for the Model 8373. The keys are referenced in the
Basic Operation section
of this chapter and in Chapter 2 - Operations in More Detail.