TS Industrie Super Premium 30ER, Техническое руководство

Страница: 53 / 76

Super Premium 30ER / 35DR / 35DRI
53
23/01/2014
VarioStress
ANTI-JAM SYSTEM
The Super PREMIUM DRI is equipped with a controller of the rotation of the rotor that is
linked to an automat. Hence, we can prevent the machine from being blocked: permanent
information about the rotating speed of the rotor is being sent to the VarioStress. When the
rotor speed falls below a factory-set threshold, the hydraulic supply of the feed is
interrupted. The feed and belt will stop, the machine will no longer be fed material and the
engine can reach its working speed agian. When the speed exceeds the lower threshold, the
feed roll and belt are supplied with oil again and the engine starts running again.
There are three anti-obstruction settings: see the next page
The distance between the speed
controller
( 1 ) and the pulse device
(
2
) is 0,16 to 0,20 in (4 to 5 mm) .
An automat (
3
) controls the
No Stress anti-jam system’s
solenoid valve. It is located
with the protection fuses
(
6
) (1
amp.) and ( 5 ) (3 amp.) in the
distribution box located on the
hopper’s right front part.
T h e p r i ma r y c i r c u i t ’s
protection fuse
(
4
) (10 amp.) is
in the watertight fuse-holder
on the starter cable.
D E S C R I P T I O N A N D
M A N I P U L A T I O N