Tryton TMA1300K, Руководство по эксплуатации

Страница: 8 / 36

8
After replacement, switch the tool on and let it running idle for about 5 Each household may contribute to the recovery and reuse (recycling) of
minutes. old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
The tool should be transported and stored in its transportation case that
machinery and appliances. Moreover, general purpose collecting points
protects the content from moisture, penetration of dust and fine
for such equipment are available.
particles. In particular it is necessary to protect the ventilation slots. Fine
particles, if penetrate into the device enclosure, may damage the electric
MANUFACTURER:
motor.
PROFIX Ltd.,
34 Marywilska Street,
PROTECTION OF THE ENVIRONMENT:
03-228 Warsaw, POLAND.
NOTE : The symbol nearby denotes that old equipment must
This appliance is in conformity with national and European standards as
never be thrown away together with other waste (with the
well as with general safety guidelines.
penalty of a fine). Hazardous components of electronic
equipment may adversely affect the natural environment
Any repairs are allowed to be carried out exclusively by qualified staff
and human health. with use of original spare parts.
TRANSPORT:
Co.
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device purchased.
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.