Tryton TJD 90, Руководство по эксплуатации

Страница: 8 / 48

8
gap between charging operations must be not less than 30
ź
Cutting bar cover
minutes.
Operating instruction -
In no case may you open the battery.
Under unfavourable conditions electrolyte may leak from
batteries, be careful to avoid contacts with the liquid. In case
The numbering of device elements refers to the drawing on pages 2-3 of the
of accidental contacts with the liquid wash the affected
instruction manual:
locations with water. When liquid penetrates eyes, seek also
Fig. Cutting bar
for medical assistance. The liquid that leaks from batteries may be
Front handle cover
a reason for irritation or scalds.
Front handle
When the battery unit is not in use keep it far away from
Safety button
metallic items such as paper clips, coins, keys, nails, bolts or
Rear handle
other metal things that may short the battery terminals.
On/off switch
Shorts of battery terminals may cause burns or fires.
Cutting bar cover
Never throw batteries to fireplaces.
Opening for hanging on a wall
Never charge a damaged battery.
Fig. Battery lock button*
The batteries are intended for multiple use and contain
Battery*
harmful lithium.
Fig. 11. Charger*
Upon the battery lifetime expires the battery must be disposed
in accordance with environmental regulations. Discharge the
battery first top the empty state and remove from the electric tool. Hand
Battery level indicator button*
over to an organization that deals with utilization of batteries or take it
Battery level indicator*
back to the shop where the tool had been purchased.
* The accessories shown or described are not standard equipment.
Using the charger:
For the complete offer of auxiliary equipment, see our catalogue.
a) Use only dedicated power adapters to charge the battery.
Application of a power adapter dedicated to charge another type of the
battery unit poses a risk of fires.
see Fig.
b) Do not disassemble the charger.
Item
c) The charger is designed exclusively for indoor use. It must not be
Item 2: Do not use the device in the rain!
exposed to water or moisture.
d) Charge only in an ambient temperature between 15-25 Item Guaranteed noise level emitted to the environment.
degrees.
TECHNICAL PARAMETERS:
e) Do not insert metal objects of any kind into the charger.
Any
modifications of the tool by the user relieve the manufacturer from
responsibility for any damage and injuries to the user and the
The vibration level value given refers to basic application of the tool. If the
surroundings.
tool is used for other applications or with other tools, or if it is not
maintained properly, the vibration level may differ from the values given.
The above-mentioned causes may lead to higher exposure to vibrations
during the whole work time.
Battery-powered devices should be repaired only by
One must implement additional safety measures to protect the operators
authorised persons.
from exposure to vibrations, such as maintenance of the electric tool and
n
work tools, assurance of proper hand temperature, or determination of
ź
Battery-powered hedge trimmer the sequence of work operations.
- 1 pc.
ź
1pc.
g )
ź
Warranty card - 1 pc.
h )
n
Device components
A:
i )
j )
k )
B: 9.
10.
C:
12. Adapter
13.
14.
n
Pictograms
Explanation of the icons located on the nominal plate and the
information tags ( A1 ):
1: Read this instruction before switching on the power supply!
3:
PURPOSE AND CONSTRUCTION OF THE TRIMMER:
WARNING! The device is not intended for
professional, craft or industrial use. The warranty
agreement does not apply, if the device was used in
craft shops, industrial facilities or similar establishments.
The set includes:
- 1 pc.
1.
2.
3.
4.
5.
6.
7.
8.
*
The cordless hedge trimmer is designed for use in home gardens and for
trimming hedges, shrubs and bushes.
Any use of the trimmer in a manner contrary to the purpose stated above
is forbidden and will void the warranty, and the manufacturer's liability
for any resulting damage.
The structure of the trimmer is shown in Fig.
A on page 2.
Proper use of the trimmer also applies to maintenance, storage,
transport and repairs.
The trimmer can be repaired only at service centres designated by the
manufacturer.
Li-Ion
Stroke frequency without load 1400/min
Weight (with battery) 2,6 kg
Acoustic pressure level (LpA) 79,1 dB(A)
Acoustic power (LwA) 90,1 dB(A)
Working width 460 mm
Supply voltage 20 V d.c.
MODEL TJD90
T olerance of measurements K ,K 3 dB(A)
LpA LwA
Average vibration according to EN 60745
2
1,937 m/s
2
T olerance of measurements K 1,5 m/s
Recommended 20 V Li-ion batteries
TJ15AK (1,5Ah), TJ2AK (2Ah)
Recommend chargers
TJ3LD (3-5h), TJ1LD (1h)