Tryton THL2000B Скачать руководство пользователя страница 8

Страница: 8 / 56

Sound pressure value measured is lower than 70 dB (A).

maintenance operations (e.g.

BEFORE YOU START:

inspections, cleaning, adjustments)

1. Make sure that power supply parameters meet the requirements

always unplug the power cord from

provided on the tool nameplate.

Make sure the tool switch is in off position. Connecting the tool to the

the mains socket.

mains socket when its switch is in on position can result in serious
accident, as the hot air gun starts immediately.

)

Never allow children to use the tool.

3. When your workplace is too far to plug the tool directly to the mains

APPLICATIONS AND CONSTRUCTION:

socket, use an extension cord with a cable cross-section meeting the
tool requirements. Extension cords should be as short as possible.

The hot air gun is a portable power tool. It features small dimensions,

When in use extension cords must be fully uncoiled.

ergonomic design, low noise emission, high speed air flow

adjustment

of operating temperature and speed of airflow.

DURING OPERATION:

The tool is intended for removing paint coats, shaping and welding

Switching on/off

plastics and fitting shrinking plastic tubing. It can be also used to soften

To switch on the tool set the on/off switch/ operation mode selector (

)

adhesives and defrost water pipes.

to position

III

WARNING!

The appliance is not intended to be operated by

To switch the tool off set the on/off switch/ operation mode selector

means of an external timer or separate remote-control system.

(

) to position

Do not use the tool in professional applications.

Any use in

Setting operation mode

applications other than indicated is prohibited and results in making the
warranty void and null and waiving manufacturer's liability for any

The on/off switch/ operation mode selector (

) can be set in

three

resulting damage.

positions.

Any modification to the tool carried out by the user waives

The air flow and temperature required can be adjusted by using the table:

manufacturer's liability for damage to the tool, user or other property.
Specific  residual  risks  cannot  be  eliminated  despite  proper  use.  The
following threats may occur resulting from the design and structure of
the machine:
-  Injury from contact with hot parts;
-  Ejection of a workpiece or its parts

The set includes:

Hot air gun - 1 piece

NOTE:

After changing from higher to lower temperature always allow the

User's manual - 1 piece

tool to cool down.

Warranty card - 1 piece

Temperature adjustment

Tool components

(see Fig.

The numbering of tool components refers to graphics presented on page 2
of the user's manual:

Outlet nozzle

see Fig.

Operating temperature

control

WORKING TIPS:

On/off switch/ Operation mode selector

NOTE!

Avoid holding the tool perpendicularly to surface

Power cord

processed. It results in hot air reflection and sucking it back by
the motor rotor. It results in increasing temperature inside the

TECHNICAL DATA:

motor and damage to the tool. The hot air gun should be held at an angle of
approx. 45º to the surface processed.

The distance between the nozzle and object processed depends on the
material, but cannot be lower than 5 cm.
Before you turn the tool off, set the temperature to minimum and select
the maximum air flow for a short period (more than ten seconds) to cool
down the heating element. It will extend the life of your tool.

Putting the tool aside

To cool the hot tool down or to have both hands free, put the hot air gun
vertically onto a horizontal surface (see Fig.

NOTE:

Be especially careful when working with the tool aside! There's a risk

Noise emission information

of burns caused by its hot nozzle or hot air stream.

The operation mode

is suitable for cooling down heated objects or for

drying a paint coat. It can be also used to cool the tool before putting in
storage or replacing its nozzle (spare nozzles not provided).

Temperature can be adjusted only in hot air mode

III

. The target