Tryton THL2000B, Инструкция по эксплуатации

Страница: 5 / 56

5
system, make sure it is connected and
used properly. Using dust collectors
may reduce dust affected risks.
i) Do not let your skills gained through
the frequent use of the power tool
make you overconfident and
disregard safety rules.
Carelessness may
cause injury in a fraction of a second .
e) Power tools require maintenance.
Check power tools for concentricity or
jamming of moving parts, any cracks
and all other factors affecting the
power tool work safety. If any
damage to the power tool is
detected, it should be repaired
before use.
Improper power tool
maintenance is a reason for many accidents.
WARNING! General warnings
f) Cutting tools should be sharp and
regarding the use of power
clean. Keeping sharp cutting edges in good
tools.
condition reduces the risk of jamming and
Use and taking care of your power tool :
facilitates operation.
a) Do not overload your power tool. Use
g) Power tools, equipment, working
a power tool with power adjusted to
tools etc. should be used according to
work being done. An appropriately
this user's manual taking into
chosen power tool will allow you to work
account operating conditions and the
better and safer under load it has been
work to be done. Misusing a power tool
designed for.
can result in dangerous situations.
b) Do not use a power tool when its
h) At low temperatures and after a long
power switch is out of order (it does
b r a k e s i n o p e r a t i o n i t i s
not switch it on or off). Any power tool
recommended to turn the power tool
with its power switch out of order is
to operate it with no load for a few
dangerous and must be repaired.
minutes to provide proper grease
c) Always disconnect the plug from the
distribution inside its driving
power source and/or disconnect its
mechanism.
batter y before changing any
i) Use soft, damp (cannot be wet) cloth
settings, performing replacement or
and soap to clean power tools. Do not
storage. Such preventive measures reduce
use petrol, solvents and other agents
the risk of accidental power tool start up.
that may damage your equipment .
j) Power tools can be stored/carried
after making sure that all moving
components are locked and protected
against release with original devices
intended for this purpose.
d) Keep your power tool out of reach of
c h i l d r e n a n d d o n o t a l l o w
unauthorized persons to use the
power tool.
Power tools in hands of
untrained persons can be dangerous.