Trynex International SnowEx Precision Pro SP-1675, Руководство пользователя

Страница: 7 / 12

7 © TrynEx International 2013 (REV A) F51073A
Operating Instructions
Attaching to Vehicle/Adjustable Material Baffles
ADJUSTABLE MATERIAL BAFFLES
ATTACHING TO VEHICLE
If you are using a TPR-020 insert the hitch into your receiver. Lock with Hitch Pin and Clip (included with TPR-020). Plug Spreader Harness
into Vehicle Plug and you are ready to begin spreading.
To attach to your tractor’s three-point hitch, simply back up to the spreader frame (requires F51196 on SP-1675). Lower the hitch until the
lower arms are at the same height as the pins on the frame. Remove the linchpins from the Lift Pin. Slide the arms onto the Pins, and put the
linchpin through the Lift Pin. Tie the top link to spreader frame with the Hitch Pin. Secure with Hitch Clip.
Plug in and begin spreading.
The Precision Pro is equipped with adjustable material baffles inside the hopper. These baffles restrict the flow of salt to the auger. Leave
these baffles at the factory setting until you have run some material through the spreader at different combinations of Auger and Spinner
Speeds. The Baffles may need adjusted when changing to a different spreading material.
Use an 1/2” wrench for the bolts holding the baffles in place. Loosen the bolt to move the baffle.
Adjust the top link so the Spreader is vertical. View of Attachment Points. TPR-020 Hitch Adapter.
SP-1675