EnTire Solution TPMS User Manual
11
© 2011 TRW Automotive, Parts & Service
2.10
Monitor Tyre Configuration
Note; To be used when configuring Display Monitor with additional sensors for trailer use.
Part numbers, EPK100. EPK101, EPK102 & EPK103 are factory pre-set to accept 4,6 or 8 sensors.
If you do not wish to configure the Display Monitor for additional axles at this stage, go to Section 2.11.
Year Setting and Date Setting
Parameter Setting Mode
Tyre Sensor Mapping Diagram.
The EnTire Solution TPMS can be configured to manage 4, 6, 8, 10, 12 and 14 tyre's in 12 different
configurations. To configure your LCD Display Monitor:
1. Begin with LCD Display Monitor powered OFF.
2. Press both the "Set" and "Prog" buttons simultaneously, switch the power ON switch.
3. The LCD Display Monitor is now in tyre configuration mode.
4. Press the "Up" button to scroll through the available tyre configuration.
5. The LCD Display Monitor can support 4, 6, 8, 10, 12 and 14 tyre's in 12 different configuration.
6. Press the "Down" button to save exit.
4 + 0 EPK100
4 + 2 EPK103
