TruYard Chipper, Инструкции по безопасности, эксплуатации и обслуживанию

Страница: 13 / 16

Using a 17mm spanner, loosen
the nuts that connect the engine
to the frame of the machine.
Once all four have been
loosened, slide the engine on the
rails to increase the belt tension.
Retighten the nuts and ensure
that the engine is secure.
NOTE: WHEN ADJUSTING THE
BELT, THE FLYWHEEL
SHOULD TURN WITHOUT
TURNING THE MOTOR. DO
NOT OVERTIGHTEN.
TYRE PRESSURE
The maximum tyre pressure for the pneumatic tyres is 20psi. Over inflation of the tyre
can cause injury.
STORAGE
In the case that the C100 Chipper will not be used for an extended period, it is
important to store the machine in a location that is sheltered from the weather to
avoid damages to the machine.
The storage temperate recommended is between 0°C and 50°C.
Before this period in storage, it is recommended to:

Properly clean the machine

Carefully free the flywheel from any remains of chipped wood

Ensure that the area in which the machine is to be stored is sheltered and the
ground surface is flat and compact

Perform a check of the machine to detect possible damages or irregularities
and to ensure that the safety labels are undamaged and clearly visible
CLEANING
Regularly clean the machine using only compressed air, blowing away wood dust and
green waste residue. For this operation ensure that you wear protective gloves and
eyewear.