background image

IMPORTANT 

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE

1.  General information 

The  Valet  Wide  Area  Vacuum  cleaner  is 
designed  for  the  collection  of  dust  in  indoor 
areas.  It should not be used in outdoor areas. 
 
The  following  instructions  contain  important 
information about the machine and safety advice 
for the operator. 
 
Equipment  must  be  operated,  serviced  and 
maintained 

in 

accordance 

with 

the 

manufacturer’s instructions.  

If  in  doubt  contact  the  supplier  of  your 
machine. 

 
These  instructions  are  valid  for  the  following 
model:  

Valet Wide Area Vacuum 

 

1.1  Important Safety Advice  

When  using  electrical  equipment  basic  safety 
precautions  should  be  followed  including  the 
following. 

  Read all instructions carefully before use. 

  Before  using  the  appliance,  check  that  the 

mains  power  voltage  corresponds  with  the 
voltage shown on the data plate. 

  Do  not  leave  machine  unattended  when 

plugged in.  

  Keep  children  and  unauthorised  persons 

away from the machine when in use. 

  Do  not  leave  the  machine  connected  to  the 

electricity  supply  when  not  in  use,  always 
remove the plug from the socket-outlet. 

  Do  not  operate  switches  or  touch  the  mains 

plug with wet hands as this may cause electric 
shock. 

  Switch  off  the  machine  before  removing  the 

plug. 

  When unplugging pull the plug, not the supply 

cord. 

  Do  not  operate  the  machine  with  a  damaged 

supply  cord  or  plug,  or  after  the  machine 
malfunctions  or  is  damaged  in  any  way. 
Contact  an  authorised  Service  Agent  for 
repair or adjustment. 

  The  plug  of  the  power  supply  must  be 

removed  from  the  socket-outlet  before 
commencing  cleaning  of  the  machine  or 
undertaking maintenance operations. 

  The  power  supply  cord  must  be  regularly 

inspected  for  signs  of  damage.  If  the  power 
supply cord is damaged, it has to be replaced. 

  Do not use to pick up moisture or any liquids. 

  Do not use where hazardous dust is present. 

  Do not use in an explosive atmosphere. 

  Do not use to vacuum up sharp objects. 

  Do not pick up oil or other flammable material. 

  Take  care  when  using  machine  near  the  top 

of stairs to avoid overbalancing. 

  Do  not  use  the  appliance  to  vacuum  lighted 

cigarettes,  hot  ashes  and  other  combustible 
objects,  

 

Do  not 

use  the  appliance  to  vacuum  tiny 

particles like cement or plaster dust as this will 
shorten life of the motors. 

 

Do not 

block air flow, blocking the suction in 

any way (blocked filters, blocked hose or full 
dust bag) will decrease the efficiency and will 
shorten the life of motor. 

 

Do not 

run the vacuum cleaner over the 

power cable. 

 

Keep hair, 

loose clothing, fingers and all parts 

of body away from openings and moving 
parts. 

 
 

1.2  Guidelines for the operator 

  Only use the machine on firm level surfaces. 

  Operators  must  be  fully  trained  in  the  use  of 

the  machine  in  accordance  with  these 
instructions  and  be  able  to  perform  user 
maintenance. 

  Operators  should  be  physically  capable  to 

manoeuvre, 

transport 

and 

operate 

the 

machine. 

  Operators  should  be  able  to  recognise 

unusual  operation  of  the  machine  and  report 
any problems. 

  Wear suitable footwear to avoid slipping. 

  Wear suitable clothing to keep dry and warm.  

  Where  possible  implement  job  rotation  and 

adequate rest periods to avoid continuous use 
of the same muscles. 

 

Do not 

leave the machine running unattended 

 

Do not

 smoke when using the machine.

 

 

 

CAUTION

  -  This  machine  is  for  indoor  use 

only  and  should  not  be  used  or  stored 
outdoors or in wet conditions. 

 

1.3  Transporting the machine 

When  transporting  a  machine  ensure  that  all 
components,  accessories  and  removable  parts 
are  securely  fastened  and  that  the  supply  cord 
and plug are not trailing. 
 
Take extreme care when moving a machine up or 
down steps. 
 

1.4  Electrical connection 

Before connecting the machine to the power 
supply check that your supply voltage 
corresponds with that marked on the rating label 
on the rear of the machine. 
 
The power supply cord plus any extension leads 
should not exceed 40m in total. The cross-
section of any extension cable wiring must be at 
least 2,5mm². 
 

Содержание Valet Wide Area Vacuum









Отзывы: