Truvox International Valet BackPack, Инструкция пользователя, Страница: 7 / 16

7
3. Controls
•
The on off switch is positioned on the switch
box and which can be clipped onto the waist
belt when in use (Fig 8)
Fig 8
•
To turn the vacuum on, push the switch located
on the switch box to the (“I”) position.
•
To turn the vacuum off, push the switch located
on the switch box the (“O”) position.
4. Operation
•
Place the vacuum on your back, adjust the
shoulder straps until you feel comfortable and
then tighten the waist belt. The Backpack
vacuum is designed to ride higher on your back
for maximum comfort.
•
Plug the cord into a suitable power outlet.
Always unwind the cord completely before
vacuuming. It is important to maintain the
power cord in good condition. Use care when
pulling the cord around sharp edges and
through doorways.
4.1. Using the floor tool
•
The floor tool can be used for cleaning carpets
and hard floors. The floor heads pedal should
be down when cleaning hard floors (Fig 9) and
in the up position when cleaning carpets (Fig
10).
Fig 9
Fig 10
5. Storage
•
Always unplug the machine after use.
•
After use check the bag. If full, replace the
bag.
•
Wind the supply cord ensuring that the plug is
not trailing on the floor.
•
Store the machine in a dry indoor area only.
6. Maintenance
WARNING - Before undertaking
maintenance operations or adjustments
switch off machine and unplug from the
electricity supply.
The machine requires minimum maintenance
apart from the following checks by the operator.
•
Supply cord - Regularly inspect sheath, plug
and cord anchorage for damage or loose
connection.
•
Body of the vacuum – Clean with a damp
cloth.
•
Cloth vacuum bag – after emptying the
vacuum bag, turn it inside out and shake as
much dust out as possible. Always use a
paper bag with the cloth bag.
•
Vacuum filter – Check the vacuum filters,
clean and replace as appropriate.
•
Hose, wand and vacuum accessories –
Check and remove any debris or lint build-up
from the head.
IMPORTANT – All other servicing and repairs
should only be performed by a Truvox engineer
or Authorised Service Agent.
IMPORTANT – Should the machine fail to
operate please refer to the fault diagnosis section
in the back of the instruction manual. If the
problem / remedy is not listed please contact
Truvox Customer Service Department for rapid
attention.
7. After Sales Service
Truvox machines are high quality machines that
have been tested for safety by authorised
technicians. It is always apparent that after longer
working periods, electrical and mechanical
components will show signs of wear and tear or
ageing.
Under extreme or specialised conditions and/or
insufficient maintenance, shorter maintenance
intervals are necessary. Use only original Truvox
spare parts. Use of other spare parts will
invalidate all warranty and liability claims.
Should you require after sales service please
contact the supplier from whom you purchased
the machine, who will arrange service. Repairs
and servicing of Truvox products should only be