Truvox International Valet BackPack, Инструкция пользователя, Страница: 6 / 16

6
Fig 1
2.4. Fitting the paper vacuum bag
••••
To fit the paper vacuum bag, simply insert it
into the cloth bag, making sure that the
cardboard disc is centred on the flexible
sealing ring. When you replace the lid, the
short nozzle in the centre of the lid will be
forced into the central hole of the cardboard
disc of the paper vacuum bag thus providing
a tight seal. Make sure the paper vacuum
bag is tightly secured over the short nozzle
before vacuuming (Fig 2).
Fig 2
•
After fitting the cloth and paper bag lock the lid
down with the two latches (Fig 3).
Fig 3
•
Always ensure that the vacuum bag is empty
before vacuuming. Your BackPack vacuum
has been fitted with a thermal overload to
protect the motor against damage should the
airflow be blocked for extended periods. This
may occur if the vacuum bag is overfull or if the
vacuum hose is blocked. The vacuum motor
will stop before it can get too hot. If this
happens, replace the vacuum bag or free any
blockage and ensure that adequate airflow is
restored. The motor will automatically restart
after it has cooled to a safe operating
temperature.
2.5. Fitting the hose, handle, wand and floor
tool / accessories
•
Insert the hose into the socket on the front of
the vacuum cleaner (Fig 4)
Fig 4
•
Fit the handle to the wand connection (Fig 5).
Fig 5
•
Fit the telescopic wand to the floor tool or
accessory (Fig 6).
Fig 6
•
To lengthen the telescopic wand slide the lock
and pull the tube out (Fig 7).
Fig 7