TruVision TVF-5201, Руководство по настройке

Страница: 45 / 98

TruVision 6MP and 12MP 360° Camera Configuration Manual 39
Trigger Alarm Output Trigger external alarm outputs when an event occurs. Select
“Select All” or each individual alarm output.
Note: This option is only supported by cameras that support
alarm output.
Trigger Recording Triggers the recording to start in the camera.
11. Click Save to save changes.
To set up motion detection in advanced mode:
1. From the menu toolbar, click Configuration > Alarm/Event > Motion
Detection .
2. Select the Enable Motion Detection check box. Select Enable Dynamic Analysis
for Motion if you want to see where motion occurs in real-time.
Note: Select Local Configuration > Enable Meta Data Overlay > Disable if you do
not want the detected objects displayed with the green rectangles.
3. Select Advanced mode from the Configuration drop-down list.
4. Under Image Settings , select OFF, Auto D/N Switch or Scheduled D/N settings.
Default is OFF.
Auto D/N Switch and Scheduled D/N settings allow you to set different settings for
day and night as well as different periods.
5. Select Area No. and click Draw Area . Click and drag the mouse on the live video
image to draw an area sensitive to motion detection.
Note: You can draw up to eight motion detection areas on the same image. Stop
Drawing shows up after Draw Area is clicked.
6. Click Stop Drawing to finish drawing. Click Clear All to delete all areas marked and
restart drawing.