TRUST 910Z POWERC@M OPTICAL ZOOM
12
3.
Select the type of picture you want to take using the Up and Down
/
buttons. The pre-set symbol will appear on the LCD display. See table
8 for the description of the pre-set symbol.
4.
Press the Shutter button to take a picture.
Landscape
This pre-set is optimised for taking landscape pictures, with the
lens focus universally distributed to encompass everything
within the entire frame.
Portrait
This pre-set is optimised for taking portraits pictures of other
people, focusing more on the centre of the frame than the
peripheral parts.
Night Scene
This pre-set is optimised for taking photos at night. You should
hold the camera perfectly still when taking night shot or place it
upon a stable surface or tripod to minimise blurring resulting
from the longer exposure.
Self-Timer
This pre-set lets you to take a photo after a ten second delay.
This gives you the ability to take hands-free photos, perhaps
self-portraits or group photos, for example.
Macro
This pre-set optimises the camera for taking extreme close up
shots of objects or people within a foot or less of the camera.
When not using this pre-set, the camera lens cannot focus as
well as normal due to the extremely short distance between it
and the subject matter.
Table 8: Symbols in PRE SET mode
5.3.4
Taking pictures using Self-timer
For taking pictures using the self-timer do the following steps:
1.
Position the camera on a stable surface (such as an optical tripod) and frame
the shot.
2.
Rotate the camera’s Mode Dial to PRE-SET mode.
3.
Use the Up and Down buttons to select the Self-Timer Pre-set.
4.
Press the Shutter Button. The 10-second countdown begins immediately. As
soon as the delay ends, the camera takes the picture.
With the exception of the Shutter button, all of the camera’s other buttons behave
the same as they do in the other Pre-set modes.
5.4
Recording video clips
The camera can be used to record small video clips.
1.
Turn the MODE switch to the VIDEO mode (6, figure 4).
2.
Turn the camera on using the ON/OFF button (3). The LCD screen will be
turned on. A preview will be displayed.
3.
Focus the subject you wish to record.
