TRUST 782AV LCD POWER VIDEO
4
Item
Description Function
5
Play / Pause / Enter
button
-
Play / Pause button
-
In menu mode -> Enter button
6
Volume / Hold button
-
Activate volume control
-
Pushing this button for 2 seconds will
lock/unlock the control panel
7
Next / Up / Resolution
button
-
Next
button
-
In menu mode -> Up button
-
In video-clip mode -> Resolution
-
In picture and audio recording mode
-> Quality
8
Previous / Down / Self-
timer button
-
Previous
button
-
In menu mode -> Down button
-
In video and picture mode -> Self-
timer
9
Stop button
Stop button
Table 5: Panel
5
Setting the camera for the first time
5.1
Attach the wrist strap
A wrist strap is supplied with the camera. Carry out the following to attach it to the
camera.
1.
Insert the thin end of the wrist strap through the eye (1, fig. 1).
2.
Make a loop from the part of the wrist strap which has been inserted through
the eye.
3.
Pick up the other end of the wrist strap and push it through the loop.
4.
Pull the wrist strap until it is steady.
5.2
Insert battery and memory card
This camera is supplied with a 32 MB MMC memory card. You can also purchase
bigger memory cards. This will allow you to increase the number of photographs or
video clips that can be saved on the camera. You can use either a Secure Digital
Memory Card (SD) or a Multi Media Card (MMC).
To install the battery and/or a memory card see point 1 + 2 of the Quick Installation
Guide.
Note:
If you use an SD memory card and wish to save video clips and
photographs on it, you must remove the write protection by moving the
slide to the unlock position.
Note
:
After taking a photograph, wait at least 5 seconds before opening the
battery compartment. If the camera is still writing data to the card when
the battery is removed, all the photographs on the card may be deleted.
