350WB MOUSE WIRELESS
2
3 Installation
3.1
Uninstalling old drivers and devices
The most common cause of faults during installation is the presence of a driver for a
similar, old product. The best solution is to first remove all drivers related to old
devices before installing the new driver.
1.
Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then
select ‘Safe Mode’ from the menu which is displayed).
2.
Go to ‘Start – Settings – Control Panel’ and double-click on the ‘Add/Remove
Programs’ icon.
3.
Find all the programs for similar, old devices and remove these by clicking on
the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some
programs to appear twice. In that case, remove all the programs which
appear twice.
4.
Restart the computer.
3.2 Connecting
1.
Make sure the computer is turned off.
2.
Connect the green plug of the cradle to the PS/2 mouse connection on your
computer. Read the manual of the pc/mainboard how to do this.
3.
Place the batteries in the battery compartment (‘B’ in fig. 8).
4.
Turn the computer on.
5.
The PC will automatically detected and install a standard PS/2 Wheel mouse.
3.3
Making a wireless connection
1.
Make sure your computer is turned on.
2.
Make sure that all products are not more than 1meter apart and that there are
no objects (or a total metal surface) in between since this will reduce the
functionality of the connection.
3.
Make sure that the batteries are placed and that they have enough power.
4.
The receiver has a green indicator to show the connection status. This
indicator is located inside the purple button of the receiver.
5.
Press the purple button (‘E’ in fig.1) on the front of the receiver. The
indicators will start to flash.
6.
Press the round ID button on the bottom of the mouse (see ‘A’ in figure 8).
The green indicator will also stop flashing. The indicator will remain
constantly lit. The mouse has now made a connection with the receiver. The
mouse will now work as a standard mouse. When the receiver receives data
(from the mouse) it will flash rapidly.
7.
Continue with the installation of the software if you wish to use the extra
functions.
