3
TPN-788RX
19368
3/8”
4 CFM
83 dB
Reversible air drill
90 PSI
6-7/8”
> 2.5 m/s
2
1800 RPM
Code
Description
Chuck
Air Output
Noise Level
Vibration
Free Speed
Total Length
2.42 lb
Weight Without Accessories
Air Pressure
Air Consumption
3/8”
1/4 NPT
Air Input Connection
Hose Minimum
Recommended Diameter
Bottom
Filtering and Lubrication Requirements
Technical Data
ENGLISH
Please consider the increase in pressure in the line or the hose inside diameter to compensate the use of
too long hoses (more than 26 ft). The hose minimum inside diameter shall be 3/8” and the connectors shall be 1/4 NPT.
Use the right size and good quality couplers and accessories.
CAUTION
Dust, water and lack of oil specific for pneumatic tools are the main cause of potential flaws with the tool. We
recommend installing a Brand
UNI-LL-1/4
centralized filter-oil feeder system. This system assures lubrication
reducing 80% oil consumption significantly increasing the breathing air quality for the operator.
• The filter-oil feeder system must be regulated to administer 3 to 6 drops per minute.
• Drain the water in the air compressor tank and also condensation in the hoses before using the tool.
Consult the air compressor instructions.
CAUTION
Air Hose
UNI-LL-1/4
Centralized
Filter-Oil
Feeder System
Adapter (not
included)
Air
Compressor
