Nozzle
Head
Trigger
Wrench
Brass Rod
(TPN-884)
Spare Chucks
(TPN-884)
Chuck Housing
(TPN-884)
Adjusting Wrench
Protection Guard
Inter-Changeable
Nozzles
TPN-883 (4)
TPN-884 (6)
Air Intake
Connection
Handle
Vacuum
System
Adjusting
Knob
Cylinder
6
Nozzles Installation
• You can install in the riveter the nozzle that fits best the
rivet stem diameter.
• Use the wrench to set or remove the nozzles in the
riveter head tip.
• Double check the nozzle is tight before operating the
riveter.
Protection Guard Installation
• The protection guards prevent the stems to hit the
operator during the application.
• The stems are shot out the riveter rear side, through the
adjusting knob orifice.
• Install the protection guard is the rear side of the riveter
as shown in the illustration.
Parts
Assembly
ENGLISH
