Truper 17984, Руководство пользователя

Страница: 19 / 24

Waist
Rotation
• Connect one end of an extension cable to the blower
power cable.
• Stretch perfectly the extension cable.
• Connect the extension cable into a power outlet with
the specified voltage for the blower.
• Intermitent operation: Press switch (
A
) to strat the
equipment. To stop using it, release the switch.
• Continuous operation: Press switch (
A
) and block it,
pressing the continuous use button ( B ).
To stop it, pres and then release the switch.
• The tool can be operated in different speeds. Select
with the speed control (
C
) in the switch.
1. Blower 2. Vacuum
7
Start Up
Turning ON
Settings
• Connect the blowing nozzle / vacuum in the air outlet (to use the equipmebt as blower) or in the air inlet (to use the
equipment as vacuum) depending on the job to carry out.
• When settinh the equipment as vacuum connect the dust collecting pouch in the air outlet.
• When setting the equipment as blower do not install the dust collecting pouch.
• Set both feet firmly on the ground and the body well
balanced. Hold the equipment by the handle.
• Have the blowing nozzle point down and away from
your feet. Turn ON the equipment.
• Make side-to-side movements and rotate your waist to
make the air blowing through the nozzle, push the
residues when sweeping.
• Push the residues to make a pile.
• To prevent scattering the residues in the pile, limit the
amount of blowers working at the same time.
• To reduce noise levels, limit the number of blowers
used at the same time.
• Use the blower during reasonable schedules. Avoid
bothering other people with the noise.
• After using the blower, dispose of residues, properly.
Operation
A
B
C
CAUTION
ENGLISH