Truper 16889, Руководство пользователя

Страница: 3 / 24

Air Hose
3
TPN-776X-2
16889
3/4”
6 CFM
Air impact wrench
90 PSI
6 000 RPM
Code
Description
Twin Hammer
Impact Mechanism
Box Impeller
1 018 Nm (750 lb-ft)
Maximum Torque
Air Ejection
Free Speed
9.5 lb
Weight Without Accessories
Air Pressure
Air Consumption
1/2”
3/8” NPT
Air Inlet Connection
Hose Inside Diameter
Front and Bottom
UNI-LL-1/4
Centralized
Filter-Oiler
System
Quick
connector
(not included).
Air
Compressor
• The filter oiler system shall
be regulated to supply 3 to
6 drops per minute.
• Drain water from the air
compressor tank as well as
condensation in the hoses
before using the tool. See
the compressor
instructions.
Please consider the increase in pressure in the line or the hose inner diameter to compensate
the use of too long hoses (more than 314.96 inches). The hose minimum inner diameter shall be 1/2” and the
connectors shall be 3/8 NPT. Use the right size and good quality couplers and accessories.
CAUTION
ENGLISH
Technical Data
Dust, water and lack of oil specific for pneumatic tools are the main cause of potential malfunction of the tool.
Setting up a Brand
UNI-LL-1/4
centralized filter-oiler system is recommended. This system ensures
lubrication reducing oil consumption 80% increasing significantly the quality of air the operator is breathing.
Filtering and Lubrication Requirements
CAUTION