Truper 102480, Руководство пользователя

Страница: 10 / 28

• Loosen the cutting angle adjustment knobs ( D ).
• With the base stationary, rotate the housing until the blade is at the desired angle.
• Tighten the cutting angle adjustment knobs to prevent the housing from moving during cutting.
• The tool can make cuts from 0° to 45°.
• The cutting line marked on the graduated scale on the base ( E ) changes depending on the angle set.
D
E
• To keep the width of the workpiece fixed when making cuts,
use the cutting guide.
• To adjust the width, loosen the knob ( E ) and move the
cutting guide to the desired position.
• This action improves the quality of the cut and reduces the
possibility of deformation of the cut-off disc.
E
10
Start up
Cutting angle adjustment
Cutting line adjustment
Cutting
line at 0°
Cutting
line at 45°
ENGLISH